With the patented dry®, interseal has developed a technically and . 8 x 8 x microns ( mils) dry equivalent to. microns ( mils) wet . Interseal Interthane SYSTEMS. COMPATIBILITY. Sep 22 , , SYNTHETIC ENAMEL PAINT, INTERSEAL HSALUMINIUM PART A EGA/20LT, Sri Lanka, Bangalore, LTR, , 35,,
|Published (Last):||5 December 2009|
|PDF File Size:||8.3 Mb|
|ePub File Size:||17.65 Mb|
|Price:||Free* [*Free Regsitration Required]|
Provides quick cure even at low temperatures often encountered in maintenance painting. Always mix a complete unit in the proportions supplied. It is good working practice to periodically flush out spray equipment during the course of the working day.
Prior to paint application, all surfaces should be assessed and treated in accordance with ISO Interseal dries intetseal form a non-tacky, tough, resilient temporary protective layer. As a primer for steelwork intended for use in a wide range of environmental conditions including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges. VOC values are typical and are provided for guidance purpose intereeal.
Once units of paint have been mixed they should not be resealed and it itnerseal advised that after prolonged stoppages work recommences with freshly mixed units.
Be the first to write a review for this product! Over-application should be avoided as thick films will not be as good a substrate for topcoat adhesion after ageing as those intersewl the specified thickness. Surface preparation All surfaces to be coated should be clean, dry and free from contamination.
Search Import Export Data of India
Low molecular weight reactive additives, which will form part of the film during normal ambient cure conditions, will also effect VOC values determined using EPA Method Mouse over image to zoom. This product jnterseal not available in pale and pastel shades due to a tendency to discolour rapidly. At low temperatures, it may be necessary to thin Intercure HS to enable airless apray application to be performed.
Consult International Protective Coatings for further details. The use of alternative thinners, particularly those containing ketones, can severely inhibit the curing mechanism of the coating. A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating. Once the unit intersela been mixed, it must be used within the working pot life specified.
Export Data and Price of paint interseal hs from Bangalore | Zauba
Suitable for overcoating within 7 hours in most climatic conditions hence speeding up production and throughput in fabrication shops. Dry time inrerseal Hours 1 26 Hours 1 48 Hours 1 8 Hours 1. Zinc Phosphate version also available.
Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. Product Line 211 6. Absolute measured adhesion of topcoats to aged Intercure HS is less than that to fresh material, however, it is adequate for the specified end use. Work stoppages Do not allow material to remain in hoses, gun or spray equipment. However, these phenomena are not detrimental to anti-corrosive performance. Press and move to zoom.
Thoroughly flush all equipment with International GTA A two component, low VOC, high solids epoxy, pigmented with aluminium to provide enhanced corrosion resistance. Varnish Hybrid Water base. A two component, low VOC, high solids, fast curing anticorrosive epoxy primer.
If oxidation has occurred between blasting and application of Intercure HS the surface should be reblasted to the specified visual standard. Additionally, in common with all epoxies Intercure HS will chalk on exterior exposure. If the shop primer shows extensive or widely scattered breakdown overall sweep blasting maybe necessary.
Available in colours as well as aluminium and glass flake versions with passivator, to provide additional anti-corrosive barrier protection.
This product must only be thinned using recommended International GTA thinners. Intercure HS is not intended for use as a primer for steelwork which may be subjected to continuous immersion conditions. GTA Do not thin more than allowed by local environmental legislation Mix ratio: However, if necessary, application over prefabrication blast primers can be performed.
Low Temperature Curing 24 Hours 1. The surface may deteriorate to Sa2 standard but must be free from loose powdery deposits. Interseal HS is suitable for application to a wide range of substrates and aged coatings. Excessive over application of material on areas such as poorly prepared welds may result in long term stress cracking and so early failure. Number of Components Multi pack 4 Single Pack 2. Surface defects revealed by the blast cleaning process should be ground, filled, or treated in the appropriate manner.
Systems compatibility Intercure HS will normally be applied to suitably prepared steel, e. A high solids, low VOC, two component, high build, surface tolerant epoxy coating, Interseal HS provides excellent anticorrosive protection in industrial and offshore environments in both atmospheric exposure and immersion service.
Interseal | Protective – Coatings – AkzoNobel
Over-application of Intercure HS will extend both the minimum overcoating periods and handling times, and may be detrimental to long term overcoating properties.
Warning Intercure HS is preferred for use with systems for chemical environments where zinc based materials can be subject to attack in both acidic and alkaline conditions.
Intercure HS is suitable for application to blast cleaned surfaces which were initially to the above standard but have been allowed to deteriorate under good shop conditions for up to days.